Driveway Slab Lifting Near the Garage in Coral Springs, FL
Case Study: Settled Driveway Slabs Near a Garage in Coral Springs
When driveway slabs begin to sink near a garage, they can create uneven surfaces that make entering and leaving the garage less comfortable. Even a small difference in elevation can create a noticeable bump for vehicles and a potential trip hazard for anyone walking across the driveway.
That was the problem at this property in Coral Springs, FL.
The concrete driveway slabs near the garage had settled and needed to be lifted. Instead of removing and replacing the existing concrete, the project focused on raising the affected slabs and restoring support underneath.
The goal was simple: lift the settled driveway slabs, improve their alignment, and create a smoother transition near the garage.
The Problem
The driveway slabs near the garage had settled below their intended elevation, leaving uneven sections where the concrete should have been more closely aligned.
This type of settlement often occurs when the soil beneath a driveway compresses, shifts, or washes away. As support is lost, individual slabs can begin to drop while neighboring sections remain in place.
The affected driveway presented several concerns:
- Settled concrete slabs near the garage
- Uneven transitions between driveway sections
- Changes in concrete elevation
- Potential trip hazards
- Possible loss of support beneath the slabs
- Concern about continued settlement
Because the existing driveway was suitable for lifting, the repair could focus on correcting the settlement rather than replacing the concrete.
The Solution: Polyurethane Driveway Slab Lifting
Poly Lift USA used high-density polyurethane foam to lift and stabilize the settled driveway slabs.
The foam was injected beneath the affected concrete through small access holes. As the material expanded, it filled unsupported spaces and gradually raised the slabs toward their intended elevation.
The repair helped:
- Lift settled driveway slabs
- Improve alignment between concrete sections
- Restore support beneath the affected areas
- Fill voids underneath the driveway
- Reduce uneven transitions near the garage
- Preserve the existing concrete
By addressing the problem beneath the driveway, Poly Lift USA was able to improve the surface without unnecessary demolition.
The Process
Our crew followed a controlled polyurethane foam injection process to lift the driveway slabs near the garage.

1. Inspect the Settled Driveway
The affected driveway sections were evaluated to identify where the concrete had dropped and where additional support was needed.
Small injection holes were drilled through the settled slabs at carefully selected locations.
2. Lift & Stabilize the Slabs
High-density polyurethane foam was injected beneath the driveway.
As the foam expanded, it filled voids and unsupported areas while gradually raising the settled concrete. The lifting process was monitored to improve alignment with the surrounding slabs and garage entrance.
3. Patch & Clean Up
Once the driveway slabs were lifted and stabilized, the small injection holes were patched.
The work area was cleaned, leaving the existing driveway in place without the disruption of a full concrete replacement project.
The Results
The driveway slabs near the garage were lifted and stabilized without removing the existing concrete.
The completed repair provided:
- A more level driveway surface
- Smoother transitions between slabs
- Improved alignment near the garage
- Restored support beneath the affected concrete
- Reduced uneven areas
- Existing driveway preserved
- Minimal disruption to the property
The homeowner was able to address the settled driveway while keeping the concrete already in place.
Why Concrete Lifting Was the Right Choice
A driveway that sinks near a garage does not always need to be replaced.
When the existing slabs are still in repairable condition, polyurethane concrete lifting can restore support underneath and raise the concrete toward its original position.
For this Coral Springs driveway, lifting offered several advantages:
- No major demolition
- Small injection holes
- Controlled lifting near the garage
- Void filling beneath the slabs
- Faster repair than full replacement
- Existing concrete stays in place
Polyurethane foam lifting provided a practical way to correct the settlement while improving the driveway’s appearance and everyday use.
Sinking Driveway Near Your Garage in Coral Springs, FL?
If your driveway has settled near the garage or developed uneven sections, Poly Lift USA can help determine whether the existing concrete can be lifted and stabilized.
We provide professional concrete lifting and leveling in Coral Springs, FL, helping homeowners repair sinking driveways, uneven sidewalks, patios, and other settled concrete surfaces.
Our polyurethane foam lifting process helps restore support beneath concrete slabs without unnecessary replacement.
Call 844-765-9872 or contact Poly Lift USA today for your FREE estimate.
